Current Location > Home > Product > Details
MS-IOM1610-0
MS-IOM1610-0
供电电源: 24 VAC, 50Hz
功率: < 5 VA
输入: 16DI
尺寸(长*宽*高): 164毫米 X 150毫米 X 53毫米
重量(NET): 0.35 kg
工作环境: 0~50 ℃, 10~90% RH
电气标准: 2004/108/EC
保护等级: IP 20(IEC 529)
订购型号MS-IOM1610-0

MS-IOM1610-0 supports 16 Binary Inputs.

MS-IOM1610-0 can serve in one of three capacities, depending on where it is installed in the Metasys system.


When installed on the Sensor/Actuator (SA) Bus of a Field Equipment Controller (FEC), Advanced Application Field Equipment Controller (FAC), and IOM expands the point count of these controllers, which can be programmed in CCT.

When installed on the Field Controller (FC) Bus, IOM8410 can be used as I/O point multiplexor to support monitoring and control from a Network Automation Engine (NAE) or Network Control Engine (NCE), which needn’t be programmed in CCT, only scanned in NAE/NCE and programmed in LCT.

When set Modbus slave mode, installed on Modbus bus of CSGW-Lite, IOM can integrate into NAE/NCE through BACnet IP and programmed in LCT.


Features

1.     MS-IOM1610-0 can be installed on both FC bus and SA bus.

2.     Pluggable communications bus and supply power terminal blocks expedite installation and troubleshooting.

3.     Bluetooth interface – easy to commission.

4.     Modbus communication - set as Modbus slave mode to save addresses.

Attention:

Blow is the available controller when MS-IOM1610 installed on the Sensor/Actuator (SA) Bus:

1.     Most FEC/FAC/CGM series of controller are available.

2.     For FEC2611 and FAC3611, there is a version requirement.

FAC3611 requires 6.2.0.2101 and above. (also known as CCT10.2 and above)

FEC2611 requires 6.2.2.6 and above. (also known as CCT13 and above)